SUP-P2051-DP
- Description
Span/ Range Limits |
kPa |
inH2O |
mbar |
mmH2O |
|
B |
Span |
0.2~6 |
0.8~24 |
2~60 |
20~600 |
Range limits |
-6~0 |
-24~24 |
-60~60 |
-600~600 |
|
C |
Span |
0.4~40 |
1.6~160 |
4~400 |
40~4000 |
Range limits |
-40~40 |
-160~160 |
-400~400 |
-4000~4000 |
|
D |
Span |
2.5~250 |
10~1000 |
25~2500 |
0.25~25mH2O |
Range limits |
-250~250 |
-1000~1000 |
-2500~2500 |
-25mH2O~25mH2O |
|
F |
Span |
30~3000 |
120~12000 |
0.3~30bar |
3-300mH2O |
Range limits |
-500~3000 |
-2000~12000 |
-5~30bar |
-5~300mH2O |
|
| Reference Accuracy of Calibrated Span: | ±0.075%，±0.1% （If TD>10(TD=URL/SPAN), ±(0.005×TD)%） (includes terminal-based linearity, hysteresis, and repeatability) The square root accuracy is 1.5 times of reference accuracy of calibrated span. |
| Ambient Temperature Effects： | -20℃~65℃：±(0.075×TD+0.025)%×Span -40℃~-20℃ & 65℃~85℃:±(0.1×TD+0.025)%×Span Every 10℃ is ±0.04% ×Span (TD=1) |
| Static Pressure Effects： | ±(0.025%URL+0.05%Span)/10MPa |
| Over pressure Effects： | ±0.05%×Span /10MPa |
| Stability： | ±0.1%×Span /3 years |
| Power Supply Effects： | ±0.001% /10V (12~42V DC) |
| Output： | Two wire 4~20 mADC output with digital communications, linear or square root programmable. HART FSK protocol are superimposed on the 4~20 mADC signal. Output range: 3.9 mA to 20.5 mA. |
| Failure Alarm (the mode can be selected): | Low Mode (min): 3.7 mA High Mode (max): 21 mA No Mode (hold): Keep the effective value before the fault. Note: The standard setting of failure alarm is High Mode. |
| Response Time: | The amplifier damping constant is 0.1 sec; The sensor damping constant is 0.1~1.6 sec, it depends on the range and range compression ratio. Amplifier damping time constant is adjustable from 0.1 to 60 sec by software and added to response time. |
| UpTime: | ＜15s |
Ambient Temperature Limits: |
-40 to 85℃ / -20 to 65℃ with LCD display or fluorine rubber sealing |
Storage and Transportation Temperature Limits: |
-50 to 85℃ / -40 to 85℃ with LCD display |
| Working Pressure Limits (Silicone oil): | Maximum working pressure:16MPa,25MPa,40MPa |
| Static Pressure Limits: | 3.5kPa abs. to maximum working pressure |
| One-way Overload Pressure Limit: | The maximum one-way overload pressure is maximum working pressure |
Wetted Parts Materials
| Sensor Body： | 316L stainless steel |
Isolating Diaphragm： |
316L stainless steel / Hastelloy C/Gold plated on 316L/FEP plated on 316L/Tantalum |
| Cover Flange： | 316 stainless steel |
| Nuts and Bolts： | 304 stainless steel |
| Process Connector： | 316 stainless steel |
| Fill fluid： | Silicone oil/Fluorinated oil |
| Process Connector Gasket： | Perbunan（NBR）/Viton （FKM）/Teflon(PTFE) |
| Amplifier Housing： | Aluminum with epoxy resin coat |
| Housing Gasket： | Perbunan（NBR） |
| Name plate and tag： | 304 stainless steel |
| Weight： | 3.3kg |
Degrees of Protection: |
IP67 |