This product has high measuring accuracy, the advantages of small volume, which makes it is
widely applied in many applies. whether it is measuring the length, height, thickness, spacing, or
linear displacement, or it’s in the accuracy of the testing station, equipment calibration, etc., it can
achieve rapid, accurate and reliable measurement.
The grating micrometer sensor is a precision measuring device use the high precision grating as
the detecting element. It could use with in digital display table, become to high precision digital
measuring instrument. It could replace mechanical dial gauge, mikrokator, depth gauge, inductance
displacement measurement and precision block gauge, with the appropriate converter, which can
convert the temperature, pressure, hardness, weight parameters such as digital quantity. It use in
online monitoring and the position detection precision instruments of automated mass production.
Its advantage is measuring the value of the digital display, high precision, stable and reliable,
accurate readings. It can send data input computer print out the measurement data or curve.

model	MNGS-R10       MNGS-R20 MNGS-R30 MNGS-R40 MNGS-R50
effective range	10mm 20mm  30mm 40mm   50mm
measurement range	0~10mm   0~50mm
output signal	TTL      EIA-422-A
Operating Voltage	5V ±5%
resolution ratio	5um        1um
reference mark	One or none
protection	IP50
Operating Temperature	10~40℃

 
uses and install 
Grating sensor is mainly used for high precision measurement. When you use it in addition to
ensure the environmental conditions, the right to install and sue not only ensures the measurement
  precision and the service life can also be extended. The correct installation position of grating micro
sensor is the rod down or horizontally. There are two installation fixed way: Fixed by screws, the
fixing hole center distance for  22±0.2mm.  ‚According to  with 15 axis clamp. After installation and
fixing the center line of rod will perpendicular to be measured with workpiece. When you use it, the
measuring head contact surface, digital display table cleared, gently lift rod, when the probe contacts
the surface of the workpiece to be measured, digital display value is the measured value. Avoid fast
push or quick release rod, so as not to damage the grating or because of the impact of sensor accuracy.