SUP-pH6.0 pH/ORP controller
Views: 8460
Applications: SUP-pH6.0 industrial pH controller is an online analyzer which applied in chemical industry metallurgy, environment protection, food, agricultrue and so on. With RS-485 can connect with computer to get data and recorder.
Types :
- Description
- Installation
- Order lnformation
SUP-pH6.0 Online pH controller is a true multivariable analyzer used for measuring/controlling the pH and ORP with different temperature. The function is switchable on the device itself. Depending on the measured variable, combination electrodes (e. g. pH sensors) or split versions (glass electrodes with a separate reference electrode) can be readily connected.
| Product Name | Online pH controller / ORP controller |
| Product Brand | Supmea |
| Measure range | 0-14 (pH), ±0.02pH |
| -1000~1000mv (ORP), ±1mv | |
| Resolution | 0.01pH,1mv |
| Stability | ≤0.02pH/24H,≤3mv/24H |
| Input Resistance | ≥10~12Ω |
| Temperature range | 0~100℃, NTC10K |
| Temp Compensation | Manual / Auto temperature compensation |
| Communication | RS485, standard Modbus |
| Signal output | 4-20mA output, Maximum loop 750Ω, 0.01%FS |
| Power supply | 220V±1%,50Hz |
| Relay out | 250VAC, 3A |
Wiring Method
Installation methods
Open a 92.5 * 92.5 installation hole on the instrument cabinet or installation panel. Insert the fixation screws into the hole, as shown below.
Installation of electrode
Schematic diagram of common installation method
①Side wall installation ②Flange mounted at the top ③Pipe installation ④Top installation
⑤Submersible installation ⑥Flow-through installation
The interface must be in 15°oblique angle, or it will affect the normal test and use of the electrode.
We won’t be responsible for any results due to this.
Instrument Selection
■ Configurable isolating transmitting 4-20mA output, max.loop750Ω, 0.1%FS.
■ Conventional range controller Measuring range:
·0.01 electrode: 0.02～20.00us/cm or 0.00～20.00mΩ*cm
·0.1 electrode: 0.2～200.0us/cm
·1.0 electrode: 2～2000us/cm
·10.0 electrode: 0.02～20ms/cm
·30.0 electrode: 0.06～60ms/cm
■ Large range controller Measuring range:
·0.01 electrode: 0.2～200.0us/cm
·0.1 electrode: 2.0～2000us/cm
·1.0 electrode: 0.02～20ms/cm
·10.0 electrode: 0.2～200ms/cm
·30.0 electrode: 0.6～600ms/cm
■ Accuracy: ±1%FS Stability: ±1%FS/24H
■ Temperature measuring range:-10-130℃, accuracy: ± 0.5℃, NTC10K or PT1000 temperature offset
■ RS485 function: compactible with standard
MODBUS-RTU communication protocol
